This is the bed that started our dungeon furniture line, “The Folsom Bed”. With the stylish use of steel “roping”, the Folsom bondage bed takes its inspiration of straight prison-like bars and adds an elegant twist to the look of your headboard and footboard. Hold on to those bars, cause this is one prison bed you'll look forward to being in.
Can I customize my bed? (learn more)
Available in Full, Queen, King and CalKing bed sizes. The following guide provides measurements:
Our Standard Bed Frame Sizes (Assembled)
|Bed Size||Bed Width||Bed Length||Bed Height|
|Full||55.25 in.||82.5 in.||80 in.|
|Queen||61.25 in.||87.5 in.||80 in.|
|King||77.25 in.||87.5 in.||80 in.|
|CalKing||73.25 in.||91.5 in.||80 in.|
For reference, here are industry standard mattress sizes (dimensions):
|Mattress Size||Mattress Width||Mattress Length|
|Full||54 in.||75 in.|
|Queen||60 in.||80 in.|
|King||76 in.||80 in.|
|CalKing||72 in.||84 in.|
NOTE: This bed is also available in a raised Platform Bed Frame (mattress-only) style. The standard platform bed rail height is modified to 15" from floor, with 12" of height under the bed rails (adjustments to height can be requested). (learn more)
MAGNETIC VOTIVE LIGHTING
TOP RAIL RESTRAINTS (TRR)
TOP CROSS BARS (TXB)
Our platform frame is constructed as most mattress-only style bed platform, for those not wishing to use a standard box spring on their bed.
We simply raise the lower bed rails to a height where a mattress would normally meet a box spring, and add additional bed slats to close the gaps a bit more. NOTE: we do, however, recommend a rigid base, low profile (2-3") boxspring, or bunkie board underneath to protect the mattress and prevent the sagging of the mattress between the slats - to avoid slat movement and potential noise. We recommend searching Amazon.com for bunkie boards based on the size of the bed you're ordering - sold separately and not included. It provides a modified bed rail height of 15" from floor, which subsequently provides 12" of height under the bed rails. Adjustments to these heights can be requested (higher or lower), but bear in mind the effect this might have on the foot board pattern, and your potential use of a sling at the foot of the bed. (learn more about this option)
FOOTBOARD TOP RAIL (FTR)
ADDITIONAL RESTRAINT POINTS (ARP)/D-Rings
UNDER BED CAGE OPTION
Adds a cage under the main platform of your bed. Please allow 2 additional weeks lead time (in addition to our standard lead times) for the addition of a cage to the build of your frame. (Learn more)
Adjusts the build of your bed to ship in smaller pieces. Follow the link to learn more if you think you might have difficulty getting the pieces of this frame into your home. Please also allow 2 additional weeks lead time (in addition to our standard lead times) for the completion of any de-constructed bed frame. (Learn more)
OFF-CENTER SUSPEND RAIL (CSR)
This option is for customers looking to add a permanent center suspension rail across the bed positioned 60" inward from the footboard (rail sits left to right), for either additional restraint points, or to support the use of a sling from the side of their bed. We push the rail out 60" (off-center) from the footboard so this strong supportive rail can hold the right extender bar in place from the side of the bed.
NOTE: to use this option with the sling extender bars from the side of the bed, your bed will require the footboard top rail option as well. We can also move this bar center or to other distances if you prefer...simply add a note during checkout with the desired location.