Depot Bed

Description

Inspired by its sister bed, The Dore Alley, “The Depot Bed” has a slightly bolder look, stretching the traditional squares to rectangles and opening-up the votive lighting option to expose more light. It brings bold style and elegance to this piece of dungeon furniture, works in any bedroom in your home, and at the drop of a hat, becomes your own personal dungeon.

Can I customize my bed? (learn more)

Bed Sizes

Available in Full, Queen, King and CalKing bed sizes. The following guide provides measurements:

Our Standard Bed Frame Sizes (Assembled)

For reference, here are industry standard mattress sizes (dimensions):

Standard Features

• Strong 3" Steel Tubing Frame
• Multiple finish options (learn more)
• Reinforced attachment points for rock solid stability ("squeak free" and "built like a tank are common references")
• Lower bed rail height at 8" from the floor, 5" of clearance under bed rail (adjustments to height can be requested)
• Three (3) box spring support system slats are standard (King sizes include center leg support)
• Restraint hoops on bottom bed rails (set of 4) double as anchors to keep box spring in place
• One restraint hoop in each of the 4 corners at the top of each bed post
• One restraint hoop in each of the 4 corners at the mattress level
• Delivery into your home is included in our shipping costs (learn more). Installation can be request but is dependent on the local delivery team's policies. They will charge for extra time on site, which would be your responsibility to arrange when your delivery appointment is scheduled.

NOTE: This bed is also available in a raised Platform Bed Frame (mattress-only) style. The standard platform bed rail height is modified to 15" from floor, with 12" of height under the bed rails (adjustments to height can be requested). (learn more)

Options

MAGNETIC VOTIVE LIGHTING

• Recommended for all beds except the LoadingDock Bed and the Naked Bed. For the Folsom and SilverLake models, Magnetic Votive lighting can be added to upper bed rail just above the headboard pattern.
• Recommended quantities by size: Full (5), Queen (5) or King/CalKing Size (6) (2" Clear or Frosted votive glass available for an additional charge)

TOP RAIL RESTRAINTS (TRR)

• Can be added to top rails for any bed style and bed size.
• Adds 4 Restraint D-Rings along both sides of Top Bed Rails (in matching position to standard Bottom Bed Rails)

TOP CROSS BARS (TXB)

• Requires the addition of Top Rail Restraints to your Top Bed Rails
• Can be added to Any Size Bed
• Sold individually or as a set of 1" thick round solid plain bars
• Each bar comes with removable caps for easy install and removal.
• NOTE: these bars are grab bars during play and are not considered chin-up bars. Individual bars, while strong, are not designed to support the full weight of a person for extended periods of time. Use for extended weight support could cause the bars to bow over time. They can be used collectively to distribute the weight when supporting a sleep-sack or other suspension equipment.

PLATFORM FRAME
Our platform frame is constructed as most mattress-only style bed platform, for those not wishing to use a standard box spring on their bed.

We simply raise the lower bed rails to a height where a mattress would normally meet a box spring, and add additional bed slats to close the gaps a bit more. NOTE: we do, however, recommend a rigid base, low profile (2-3") boxspring, or bunkie board underneath to protect the mattress and prevent the sagging of the mattress between the slats - to avoid slat movement and potential noise. We recommend searching Amazon.com for bunkie boards based on the size of the bed you're ordering - sold separately and not included. It provides a modified bed rail height of 15" from floor, which subsequently provides 12" of height under the bed rails. Adjustments to these heights can be requested (higher or lower), but bear in mind the effect this might have on the foot board pattern, and your potential use of a sling at the foot of the bed. (learn more about this option)

FOOTBOARD TOP RAIL (FTR)

• Can be added to any bed style and any bed size
• Adds a top rail to the top of the footboard to essentially create a complete cube. The standard design of our four-post beds (except the Naked Bed) leaves this portion of the footboard open so it is NOT a complete cube.

ADDITIONAL RESTRAINT POINTS (ARP)/D-Rings

• Can be added to any bed style and any bed size in any locations desired (ask if you would like to know of common placements by other customers).
• Requires instructing us, during the checkout process in the notes field, the general location for the D-Rings. After purchase, we will email a PDF with recommended locations and with a request to confirm your desired location(s).

UNDER BED CAGE OPTION
Adds a cage under the main platform of your bed. Please allow 2 additional weeks lead time (in addition to our standard lead times) for the addition of a cage to the build of your frame. (Learn more)

DE-CONSTRUCT OPTION
Adjusts the build of your bed to ship in smaller pieces. Follow the link to learn more if you think you might have difficulty getting the pieces of this frame into your home. Please also allow 2 additional weeks lead time (in addition to our standard lead times) for the completion of any de-constructed bed frame. (Learn more)

OFF-CENTER SUSPEND RAIL (CSR)
This option is for customers looking to add a permanent center suspension rail across the bed positioned 60" inward from the footboard (rail sits left to right), for either additional restraint points, or to support the use of a sling from the side of their bed. We push the rail out 60" (off-center) from the footboard so this strong supportive rail can hold the right extender bar in place from the side of the bed.

NOTE: to use this option with the sling extender bars from the side of the bed, your bed will require the footboard top rail option as well. We can also move this bar center or to other distances if you prefer...simply add a note during checkout with the desired location.